INTERNATIONAL COURSES

ASME VIII | DESIGN OF PRESSURE VESSEL (ONLINE)

COURSE DETAILS
TRAINING DETAILS
ENROL
ENQUIRY

Course is designed to equip participants with the knowledge on how to design safe and economical Pressure Vessels used in industrial plants, petroleum and chemical industries.This course will transfer to participants the theoretical and practical skills required in projects, obtained from experience and best engineering practices in design of pressure vessels

Part I:                   

Lesson 1: Introduction & ASME VIII Code lecture

Lesson 2: Internal & External Elements lecture  

Lesson 3: Design Conditions lecture        

Lesson 4: Material Selection lecture

Part II:  

Lesson 5: Joint Efficiency lecture              

Lesson 6: Internal Pressure Design lecture          

Lesson 7: External Pressure Design lecture          

Lesson 8: Nozzle Design lecture

Part III:  

Lesson 9: Non-Standard Flange Design lecture  

Lesson 10: Wind & Seismic Loads lecture              

Lesson 11: Supports for Vertical Vessels lecture

Lesson 12: Supports for Horizontal Vessels lecture

At the end of the course, participants will be able to design the main parts of a Pressure Vessel under all types of possible loading, stored product, internal pressure, wind and earthquake among others. At the end of the course participants will:

  • Know the code organization and will acquire the vocabulary and fundamentals.
  • Learn to design and calculate the main parts of a Pressure Vessel.
  • Benefit from Lessons Learned and Best Practices from different international projects.
  • Define the wind profile and seismic loading.
  • Design and calculate stiffener rings due to vacuum.
  • Learn to perform the Pressure Vessel stability verification and to define the anchoring requirement due to seismic and wind.
  • Design and calculate the shell due to internal and external pressure.
  • Design and calculate different types of nozzles.
  • Learn to design and calculate non-standard flanges.
  • Master the joint efficiency concept.
  • Learn in detail the internal and external elements of pressure vessels.
  • Learn to select materials for pressure vessels.

This course is intended for graduates (or soon to be), designers, freelancers, technicians and engineers involved in: calculation, design, selection, manufacturing, safety, quality and maintenance of systems and equipment in industrial processes.

120 Hours

Previous knowledge of this subject is not required to attend to the course.

Minimum of an Undergraduate Degree (B.Eng. B.Sc. HND) Minimum qualification in relevant field.

 

Hommaston Limited
NECOM House
15 Marina (14th Floor)
Lagos, Nigeria.

Available on Request

Javier Tirenti

Senior Mechanical Engineer and Master in Business Administration (MBA). Vast experience in design, calculation, selection and fabrication of mechanical equipment and structures in general. Vast experience providing specific training sessions in both classroom and online approaches.

Payment Before commencement of Training

Tea/Lunch

Study Notes

Introductory Videos

Multiple Choice Assignments

Real Data Sheets

Calculation Sheets Included

Extra Material

Instructor Support

REGISTRATION FORM

*  Required

*  Required

API 650 | DESIGN OF STORAGE TANKS COURSE (ONLINE)

COURSE DETAILS
TRAINING DETAILS
ENROL
ENQUIRY

Course is designed to equip participants with the knowledge on how to design safe and economical Pressure Vessels used in industrial plants, petroleum and chemical industries.This course will transfer to participants the theoretical and practical skills required in projects, obtained from experience and best engineering practices in the design of storage tanks

Part I:                   

Lesson 1. Codes & Design Conditions lecture      

Lesson 2. Material Selection lecture       

Lesson 3. Tank Shell Design lecture         

Lesson 4. Tank Bottom Design lecture

Part II:  

Lesson 5. Design of Wind Girders lecture             

Lesson 6. External Pressure – Vacuum lecture    

Lesson 7. Fixed Roof Design lecture        

Lesson 8. Floating Roof Design lecture

 

Part III:  

Lesson 9. Nozzle Design lecture

Lesson 10. Wind Loads lecture  

Lesson 11. Seismic Loads lecture              

Lesson 12. Tank Anchorage lecture

 

At the end of the course, participants will be able to design the main parts of a Storage Tanks under all types of possible loadings, stored product, internal pressure, wind and earthquake among others.

At the end of the course participants will:

  • Know the code organization and will acquire the vocabulary and fundamentals.
  • Learn to design and calculate the main parts of an Aboveground Storage Tank.
  • Benefit from Lessons Learned and Best Practices from different international projects.
  • Define the wind profile and external pressure requirements (vacuum).
  • Design and calculate top angles and wind girders for the tank shell due to wind and vacuum.
  • Learn to perform the tank stability verification and to define the anchoring requirement due to seismic and wind.
  • Understand the main differences between roof types.
  • Learn to design and calculate fixed roofs and its internal support structure.
  • Obtain the seismic spectrum, perform the overturning and sliding verification.
  • Design and calculate anchor bolts due to combined loads, define number of bolts and cross section.

This course is intended for graduates (or soon to be), designers, freelancers, technicians and engineers involved in: calculation, design, selection, manufacturing, safety, quality and maintenance of systems and equipment in industrial processes.

120 Hours

Previous knowledge of this subject is not required to attend to the course.

Minimum of an Undergraduate Degree (B.Eng. B.Sc. HND) Minimum qualification in relevant field.

 

Hommaston Limited
NECOM House
15 Marina (14th Floor)
Lagos, Nigeria.

Available on Request

Javier Tirenti

Senior Mechanical Engineer and Master in Business Administration (MBA). Vast experience in design, calculation, selection and fabrication of mechanical equipment and structures in general. Vast experience providing specific training sessions in both classroom and online approaches.

Payment Before commencement of Training

Tea/Lunch

Study Notes

Introductory Videos

Multiple Choice Assignments

Real Data Sheets

Calculation Sheets Included

Extra Material

Instructor Support

REGISTRATION FORM

*  Required

*  Required

TEMA – SHELL & TUBE HEAT EXCHANGERS: I (ONLINE)

COURSE DETAILS
TRAINING DETAILS
ENROL
ENQUIRY

Course is designed to equip participants with the knowledge how to design safe and economical Pressure Vessels used in industrial plants, petroleum and chemical industries. This course will transfer to participants the theoretical and practical skills required in projects, obtained from experience and best engineering practices in the design of Shell and heat exchangers.

Lesson 1.Terminology

  • Fluids, Pressure, Temperature, External loads

Lesson 2.Shell and tube heat exchangers

  • Parts and types of heat exchangers
  • Main components
  • TEMA heat exchanger selection

Lesson 3.Design codes

  • TEMA Code, HEI Standard
  • API 660, ASME VIII

Lesson 4.Material Selection

  • Corrosion
  • Essential properties of materials

Lesson 5.Shell and tube heat exchanger arrangement

  • Tube pattern
  • Tube / Shell side number of passes

Lesson 6.Tube bundle design

  • Tube sheet, Tube bundle assembly
  • Baffle, Tubes
  • Floating head
  • Impingement plate

Lesson 6.Design of external elements

  • Main parts
  • Flat covers

 

Case Studies

Module 1: vocabulary, terminology, TEMA code organization and material selection.

Module 2: S&T heat exchangers arrangement and calculation of heat transfer tubes.

Module 3: design of Tube sheets and thickness calculation.

Module 4: design of Flat Covers and thickness calculation.

At the end of the course participants will:

  • Get familiar with the TEMA code organization and acquire vocabulary and fundamentals
  • Assimilate S&T Heat Exchangers Configuration and design and calculate the some of the main parts
  • Benefit from Lessons Learned and Best Practices from different international projects

This course is intended for graduates (or soon to be), designers, freelancers, technicians and engineers involved in: calculation, design, selection, manufacturing, safety, quality and maintenance of systems and equipment in industrial processes.

40 Hours

Previous knowledge of this subject is not required to attend to the course.

Minimum of an Undergraduate Degree (B.Eng. B.Sc. HND) Minimum qualification in relevant field.

 

Hommaston Limited
NECOM House
15 Marina (14th Floor)
Lagos, Nigeria.

Available on Request

Javier Tirenti

Senior Mechanical Engineer and Master in Business Administration (MBA). Vast experience in design, calculation, selection and fabrication of mechanical equipment and structures in general. Vast experience providing specific training sessions in both classroom and online approaches.

Payment Before commencement of Training

Tea/Lunch

Study Notes

Introductory Videos

Multiple Choice Assignments

Real Data Sheets

Calculation Sheets Included

Extra Material

Instructor Support

REGISTRATION FORM

*  Required

*  Required

PIPING SYSTEMS IN INDUSTRIAL PLANTS: I (ONLINE)

COURSE DETAILS
TRAINING DETAILS
ENROL
ENQUIRY

Course is designed to equip participants with the knowledge on how to design safe and economical Piping System used in industrial plants, petroleum and chemical industries. This course will transfer to participants the theoretical and practical skills required in projects, obtained from experience and best engineering practices, in designing Piping system in industrial plants

Lesson 1. Fluid mechanics

  • Fluids introduction
  • Flow of fluids
  • Energy conservation law
  • Mass conservation law
  • Straight run pressure loss
  • Fittings pressure loss
  • Optimal diameter calculation

Lesson 2. Piping systems

  • Applicable codes
  • Main pipe characteristic
  • Corrosion, mechanical properties
  • Piping materials
  • Assembly methods
  • Flanges, fittings, valves

Lesson 3. Piping design and arrangement

  • Layout considerations
  • Plant layout specification
  • Plot plan, plant general arrangement
  • Pipe racks
  • Connection to equipment nozzles

 

Case Studies

Module 1: vocabulary, terminology, organization of the codes and materials.

Module 2: pipeline sizing, pressure loss in straight runs and fittings.

Module 3: selection and specification of the different components of a piping system.

Module 4: piping design and arrangement, pipe rack design, piping layout.

At the end of the course participants will:

  • Get familiar with the TEMA code organization and acquire vocabulary and fundamentals
  • Assimilate S&T Heat Exchangers Configuration and design and calculate the some of the main parts
  • Benefit from Lessons Learned and Best Practices from different international projects

This course is intended for graduates (or soon to be), designers, freelancers, technicians and engineers involved in: calculation, design, selection, manufacturing, safety, quality and maintenance of systems and equipment in industrial processes.

40 Hours

Previous knowledge of this subject is not required to attend to the course.

Minimum of an Undergraduate Degree (B.Eng. B.Sc. HND) Minimum qualification in relevant field.

 

Hommaston Limited
NECOM House
15 Marina (14th Floor)
Lagos, Nigeria.

Available on Request

Javier Tirenti

Senior Mechanical Engineer and Master in Business Administration (MBA). Vast experience in design, calculation, selection and fabrication of mechanical equipment and structures in general. Vast experience providing specific training sessions in both classroom and online approaches.

Payment Before commencement of Training

Tea/Lunch

Study Notes

Introductory Videos

Multiple Choice Assignments

Real Data Sheets

Calculation Sheets Included

Extra Material

Instructor Support

REGISTRATION FORM

*  Required

*  Required

DESIGN OF MECHANICAL EQUIPMENT COURSE (ONLINE)

COURSE DETAILS
TRAINING DETAILS
ENROL
ENQUIRY

Course is designed to equip participants with the knowledge on how to design safe and economical Mechanical Equipment used in industrial plants, petroleum and chemical industries. This course will transfer to participants the theoretical and practical skills required in projects, obtained from experience and best engineering practices in the design of mechanical equipment

Lesson 1. Mechanical Equipment for Industrial Plants

  • Industrial Plants Introduction
  • Vocabulary and terminology
  • Equipment types
  • Materials

Lesson 2. ASME B31; Piping systems

  • Joining methods
  • Flanges, fittings, valves
  • Layout and Plot Plan
  • Pipe racks
  • Piping Interconnecting

Lesson 3. ASME VIII – Pressure Vessels

  • Design Conditions
  • Joint Efficiency
  • Internal Pressure
  • Design of shell and heads
  • Nozzle design

Lesson 4. TEMA – Shell &Tube Heat Exchangers

  • Classification and configuration
  • Tube bundle design
  • Heat transfer tubes
  • Tube sheet design
  • Design of external elements

Lesson 5. API 650 – Aboveground Storage Tanks

  • Design considerations
  • Tank shell design
  • Tank bottom design
  • Annular plate
  • Nozzle selection

Case Studies

Module 1, Industrial Plants: equipment types, materials, vocabulary and terminology.

Module 2, Piping Systems: fittings selection, flanges, layout and interconnections.

Module 3, Pressure Vessels: design conditions, joint efficiency, shells, heads, vocabulary and terminology.

Module 4, S&T Heat Exchangers: classification and configuration, tube bundle.

Module 4, Storage Tanks: vocabulary and terminology, design of shell, bottom, roof.

At the end of the course participants will:

  • Assimilate the different mechanical equipment of an industrial plant and their main functions.
  • Get familiar with the different design codes of mechanical equipment.
  • Benefit from Lessons Learned and Best Practices from different international projects

This course is intended for graduates (or soon to be), designers, freelancers, technicians and engineers involved in: calculation, design, selection, manufacturing, safety, quality and maintenance of systems and equipment in industrial processes.

100 Hours

Previous knowledge of this subject is not required to attend to the course.

Minimum of an Undergraduate Degree (B.Eng. B.Sc. HND) Minimum qualification in relevant field.

 

Hommaston Limited
NECOM House
15 Marina (14th Floor)
Lagos, Nigeria.

Available on Request

Javier Tirenti

Senior Mechanical Engineer and Master in Business Administration (MBA). Vast experience in design, calculation, selection and fabrication of mechanical equipment and structures in general. Vast experience providing specific training sessions in both classroom and online approaches.

Payment Before commencement of Training

Tea/Lunch

Study Notes

Introductory Videos

Multiple Choice Assignments

Real Data Sheets

Calculation Sheets Included

Extra Material

Instructor Support

REGISTRATION FORM

*  Required

*  Required

TEMA – SHELL & TUBE HEAT EXCHANGERS: II (ONLINE)

COURSE DETAILS
TRAINING DETAILS
ENROL
ENQUIRY

Course is designed to equip participants with the knowledge on how to design safe and economical Mechanical Equipment used in industrial plants, petroleum and chemical industries. This course will transfer to participants the theoretical and practical skills required in projects, obtained from experience and best engineering practices in the design of mechanical equipment

Lesson 1. Shell and tube heat exchangers

  • Parts and types of heat exchangers
  • Main components
  • TEMA heat exchanger selection

Lesson 2. Shells and heads under internal pressure

  • Design conditions
  • Shell side and tube side
  • ASME Section VIII, Div.1 equations
  • Cylindrical shells
  • Heads: elliptical, spherical, tori spherical

Lesson 3. Conical transitions

  • ASME VIII Div.1 Equations
  • Conical transitions
  • Tori conical transitions
  • Shell-transition assembly
  • Best practices

Lesson 4. Nozzles for heat exchangers

  • Types of nozzles
  • Standard flanges
  • Nozzle neck
  • Reinforcing pads

Case Studies

Module 1: vocabulary, terminology, design conditions and material selection.
Module 2: design and calculation of shell and heads under internal pressure.
Module 3: design of nozzles, selection of standard flanges, necks and reinforcing pads calculation.
Module 4: design of concentric and eccentric conical transitions

At the end of the course participants will:

  • Assimilate the different mechanical equipment of an industrial plant and their main functions.
  • Get familiar with the different design codes of mechanical equipment.
  • Benefit from Lessons Learned and Best Practices from different international projects

This course is intended for graduates (or soon to be), designers, freelancers, technicians and engineers involved in: calculation, design, selection, manufacturing, safety, quality and maintenance of systems and equipment in industrial processes.

40 Hours

Previous knowledge of this subject is not required to attend to the course.

Minimum of an Undergraduate Degree (B.Eng. B.Sc. HND) Minimum qualification in relevant field.

 

Hommaston Limited
NECOM House
15 Marina (14th Floor)
Lagos, Nigeria.

Available on Request

Javier Tirenti

Senior Mechanical Engineer and Master in Business Administration (MBA). Vast experience in design, calculation, selection and fabrication of mechanical equipment and structures in general. Vast experience providing specific training sessions in both classroom and online approaches.

Payment Before commencement of Training

Tea/Lunch

Study Notes

Introductory Videos

Multiple Choice Assignments

Real Data Sheets

Calculation Sheets Included

Extra Material

Instructor Support

REGISTRATION FORM

*  Required

*  Required

INTERNATIONAL COURSES

COURSE DETAILS
TRAINING DETAILS
ENROL
ENQUIRY

This course provides a preliminary orientation of Process Engineering, Stakeholders, Equipment, Deliverables, Project requisites, Project type and function of Oil and Gas facility Process systems. It also provides fundamental Knowledge of the oil and Gas Industry Regulators in Nigeria, Essentials of the Oil and Gas industry, and safety requirement of the industry. It will aid assimilation of project basics by a Process trainee/ new entrant, useful in supporting the design team efforts and boost employability

• Nigeria Oil and Gas industry Regulators.
• Oil and Gas industry Essentials.
• Engineering Project Management Essentials.
• Oil and Gas Health and Safety Essentials.
• Fundamentals of Process Engineering Facility Design.

Upon completion of the course, participants will be able to

• Define Process Engineering, its application and the process Engineer functionality in oil and gas projects.
• Define a Project, list the different phases and explain the differences between the Phases.
• Identify Process Engineering Design activities and deliverables
• Describe and Identify Production Facilities and Main Process Sections
• Identify and state the functions of typical Process Engineering Equipment
• Identify and state the importance and application of relevant codes and standards in Process Engineering Design
• Identify and state the application of the various Process Engineering design Software
• Understand the functions and Roles of Oil and Gas Regulators in the industry
• Understand the importance of the licenses under regulation and state the requirements of these licenses.
• Identify the activities in Upstream, Midstream and Downstream Sectors of the Oil and Gas Industry
• Understand the safety requirement of the industry

This Course is suitable to a wide range of professionals but will greatly benefit Technical and non-technical personnel in the chemical, petrochemical, oil and process industries with a need to understand and discuss fundamental process engineering areas:

• Engineers (particularly recently graduated Engineers or Engineers in conversion) looking to acquire Fundamental knowledge and best practices in Oil and Gas facilities design.
• Plant/Operations Personnel and Managers
• Petroleum/Chemical Engineers
• Production Engineers
• Trainee Process Engineers
• R&D Chemists, Plant Chemists
• Economists and Business Managers
• Project Managers/ Coordinators
• Non-technical personnel

2 Days

Minimum of an Undergraduate Degree (B.Eng. B.Sc. HND) Minimum qualification in relevant field.

Hommaston Limited
NECOM House
15 Marina (14th Floor)
Lagos, Nigeria.

This course is an interactive training delivered by our Experienced oil and Gas industry Subject matter experts and adapted to participants’ experience.

Tea Break, Certificate of Completion, and Training Manuals

REGISTRATION FORM

*  Required

*  Required

INTERNATIONAL COURSES

COURSE DETAILS
TRAINING DETAILS
ENROL
ENQUIRY

This course provides a preliminary orientation of Process Engineering, Stakeholders, Equipment, Deliverables, Project requisites, Project type and function of Oil and Gas facility Process systems. It also provides fundamental Knowledge of the oil and Gas Industry Regulators in Nigeria, Essentials of the Oil and Gas industry, and safety requirement of the industry. It will aid assimilation of project basics by a Process trainee/ new entrant, useful in supporting the design team efforts and boost employability

• Nigeria Oil and Gas industry Regulators.
• Oil and Gas industry Essentials.
• Engineering Project Management Essentials.
• Oil and Gas Health and Safety Essentials.
• Fundamentals of Process Engineering Facility Design.

Upon completion of the course, participants will be able to

• Define Process Engineering, its application and the process Engineer functionality in oil and gas projects.
• Define a Project, list the different phases and explain the differences between the Phases.
• Identify Process Engineering Design activities and deliverables
• Describe and Identify Production Facilities and Main Process Sections
• Identify and state the functions of typical Process Engineering Equipment
• Identify and state the importance and application of relevant codes and standards in Process Engineering Design
• Identify and state the application of the various Process Engineering design Software
• Understand the functions and Roles of Oil and Gas Regulators in the industry
• Understand the importance of the licenses under regulation and state the requirements of these licenses.
• Identify the activities in Upstream, Midstream and Downstream Sectors of the Oil and Gas Industry
• Understand the safety requirement of the industry

This Course is suitable to a wide range of professionals but will greatly benefit Technical and non-technical personnel in the chemical, petrochemical, oil and process industries with a need to understand and discuss fundamental process engineering areas:

• Engineers (particularly recently graduated Engineers or Engineers in conversion) looking to acquire Fundamental knowledge and best practices in Oil and Gas facilities design.
• Plant/Operations Personnel and Managers
• Petroleum/Chemical Engineers
• Production Engineers
• Trainee Process Engineers
• R&D Chemists, Plant Chemists
• Economists and Business Managers
• Project Managers/ Coordinators
• Non-technical personnel

2 Days

Minimum of an Undergraduate Degree (B.Eng. B.Sc. HND) Minimum qualification in relevant field.

Hommaston Limited
NECOM House
15 Marina (14th Floor)
Lagos, Nigeria.

This course is an interactive training delivered by our Experienced oil and Gas industry Subject matter experts and adapted to participants’ experience.

Tea Break, Certificate of Completion, and Training Manuals

REGISTRATION FORM

*  Required

*  Required

INTERNATIONAL COURSES

COURSE DETAILS
TRAINING DETAILS
ENROL
ENQUIRY

This course provides a preliminary orientation of Process Engineering, Stakeholders, Equipment, Deliverables, Project requisites, Project type and function of Oil and Gas facility Process systems. It also provides fundamental Knowledge of the oil and Gas Industry Regulators in Nigeria, Essentials of the Oil and Gas industry, and safety requirement of the industry. It will aid assimilation of project basics by a Process trainee/ new entrant, useful in supporting the design team efforts and boost employability

• Nigeria Oil and Gas industry Regulators.
• Oil and Gas industry Essentials.
• Engineering Project Management Essentials.
• Oil and Gas Health and Safety Essentials.
• Fundamentals of Process Engineering Facility Design.

Upon completion of the course, participants will be able to

• Define Process Engineering, its application and the process Engineer functionality in oil and gas projects.
• Define a Project, list the different phases and explain the differences between the Phases.
• Identify Process Engineering Design activities and deliverables
• Describe and Identify Production Facilities and Main Process Sections
• Identify and state the functions of typical Process Engineering Equipment
• Identify and state the importance and application of relevant codes and standards in Process Engineering Design
• Identify and state the application of the various Process Engineering design Software
• Understand the functions and Roles of Oil and Gas Regulators in the industry
• Understand the importance of the licenses under regulation and state the requirements of these licenses.
• Identify the activities in Upstream, Midstream and Downstream Sectors of the Oil and Gas Industry
• Understand the safety requirement of the industry

This Course is suitable to a wide range of professionals but will greatly benefit Technical and non-technical personnel in the chemical, petrochemical, oil and process industries with a need to understand and discuss fundamental process engineering areas:

• Engineers (particularly recently graduated Engineers or Engineers in conversion) looking to acquire Fundamental knowledge and best practices in Oil and Gas facilities design.
• Plant/Operations Personnel and Managers
• Petroleum/Chemical Engineers
• Production Engineers
• Trainee Process Engineers
• R&D Chemists, Plant Chemists
• Economists and Business Managers
• Project Managers/ Coordinators
• Non-technical personnel

2 Days

Minimum of an Undergraduate Degree (B.Eng. B.Sc. HND) Minimum qualification in relevant field.

Hommaston Limited
NECOM House
15 Marina (14th Floor)
Lagos, Nigeria.

This course is an interactive training delivered by our Experienced oil and Gas industry Subject matter experts and adapted to participants’ experience.

Tea Break, Certificate of Completion, and Training Manuals

REGISTRATION FORM

*  Required

*  Required

INTERNATIONAL COURSES

COURSE DETAILS
TRAINING DETAILS
ENROL
ENQUIRY

This course provides a preliminary orientation of Process Engineering, Stakeholders, Equipment, Deliverables, Project requisites, Project type and function of Oil and Gas facility Process systems. It also provides fundamental Knowledge of the oil and Gas Industry Regulators in Nigeria, Essentials of the Oil and Gas industry, and safety requirement of the industry. It will aid assimilation of project basics by a Process trainee/ new entrant, useful in supporting the design team efforts and boost employability

• Nigeria Oil and Gas industry Regulators.
• Oil and Gas industry Essentials.
• Engineering Project Management Essentials.
• Oil and Gas Health and Safety Essentials.
• Fundamentals of Process Engineering Facility Design.

Upon completion of the course, participants will be able to

• Define Process Engineering, its application and the process Engineer functionality in oil and gas projects.
• Define a Project, list the different phases and explain the differences between the Phases.
• Identify Process Engineering Design activities and deliverables
• Describe and Identify Production Facilities and Main Process Sections
• Identify and state the functions of typical Process Engineering Equipment
• Identify and state the importance and application of relevant codes and standards in Process Engineering Design
• Identify and state the application of the various Process Engineering design Software
• Understand the functions and Roles of Oil and Gas Regulators in the industry
• Understand the importance of the licenses under regulation and state the requirements of these licenses.
• Identify the activities in Upstream, Midstream and Downstream Sectors of the Oil and Gas Industry
• Understand the safety requirement of the industry

This Course is suitable to a wide range of professionals but will greatly benefit Technical and non-technical personnel in the chemical, petrochemical, oil and process industries with a need to understand and discuss fundamental process engineering areas:

• Engineers (particularly recently graduated Engineers or Engineers in conversion) looking to acquire Fundamental knowledge and best practices in Oil and Gas facilities design.
• Plant/Operations Personnel and Managers
• Petroleum/Chemical Engineers
• Production Engineers
• Trainee Process Engineers
• R&D Chemists, Plant Chemists
• Economists and Business Managers
• Project Managers/ Coordinators
• Non-technical personnel

2 Days

Minimum of an Undergraduate Degree (B.Eng. B.Sc. HND) Minimum qualification in relevant field.

Hommaston Limited
NECOM House
15 Marina (14th Floor)
Lagos, Nigeria.

This course is an interactive training delivered by our Experienced oil and Gas industry Subject matter experts and adapted to participants’ experience.

Tea Break, Certificate of Completion, and Training Manuals

REGISTRATION FORM

*  Required

*  Required

INTERNATIONAL COURSES

COURSE DETAILS
TRAINING DETAILS
ENROL
ENQUIRY

This course provides a preliminary orientation of Process Engineering, Stakeholders, Equipment, Deliverables, Project requisites, Project type and function of Oil and Gas facility Process systems. It also provides fundamental Knowledge of the oil and Gas Industry Regulators in Nigeria, Essentials of the Oil and Gas industry, and safety requirement of the industry. It will aid assimilation of project basics by a Process trainee/ new entrant, useful in supporting the design team efforts and boost employability

• Nigeria Oil and Gas industry Regulators.
• Oil and Gas industry Essentials.
• Engineering Project Management Essentials.
• Oil and Gas Health and Safety Essentials.
• Fundamentals of Process Engineering Facility Design.

Upon completion of the course, participants will be able to

• Define Process Engineering, its application and the process Engineer functionality in oil and gas projects.
• Define a Project, list the different phases and explain the differences between the Phases.
• Identify Process Engineering Design activities and deliverables
• Describe and Identify Production Facilities and Main Process Sections
• Identify and state the functions of typical Process Engineering Equipment
• Identify and state the importance and application of relevant codes and standards in Process Engineering Design
• Identify and state the application of the various Process Engineering design Software
• Understand the functions and Roles of Oil and Gas Regulators in the industry
• Understand the importance of the licenses under regulation and state the requirements of these licenses.
• Identify the activities in Upstream, Midstream and Downstream Sectors of the Oil and Gas Industry
• Understand the safety requirement of the industry

This Course is suitable to a wide range of professionals but will greatly benefit Technical and non-technical personnel in the chemical, petrochemical, oil and process industries with a need to understand and discuss fundamental process engineering areas:

• Engineers (particularly recently graduated Engineers or Engineers in conversion) looking to acquire Fundamental knowledge and best practices in Oil and Gas facilities design.
• Plant/Operations Personnel and Managers
• Petroleum/Chemical Engineers
• Production Engineers
• Trainee Process Engineers
• R&D Chemists, Plant Chemists
• Economists and Business Managers
• Project Managers/ Coordinators
• Non-technical personnel

2 Days

Minimum of an Undergraduate Degree (B.Eng. B.Sc. HND) Minimum qualification in relevant field.

Hommaston Limited
NECOM House
15 Marina (14th Floor)
Lagos, Nigeria.

This course is an interactive training delivered by our Experienced oil and Gas industry Subject matter experts and adapted to participants’ experience.

Tea Break, Certificate of Completion, and Training Manuals

REGISTRATION FORM

*  Required

*  Required

INTERNATIONAL COURSES

COURSE DETAILS
TRAINING DETAILS
ENROL
ENQUIRY

This course provides a preliminary orientation of Process Engineering, Stakeholders, Equipment, Deliverables, Project requisites, Project type and function of Oil and Gas facility Process systems. It also provides fundamental Knowledge of the oil and Gas Industry Regulators in Nigeria, Essentials of the Oil and Gas industry, and safety requirement of the industry. It will aid assimilation of project basics by a Process trainee/ new entrant, useful in supporting the design team efforts and boost employability

• Nigeria Oil and Gas industry Regulators.
• Oil and Gas industry Essentials.
• Engineering Project Management Essentials.
• Oil and Gas Health and Safety Essentials.
• Fundamentals of Process Engineering Facility Design.

Upon completion of the course, participants will be able to

• Define Process Engineering, its application and the process Engineer functionality in oil and gas projects.
• Define a Project, list the different phases and explain the differences between the Phases.
• Identify Process Engineering Design activities and deliverables
• Describe and Identify Production Facilities and Main Process Sections
• Identify and state the functions of typical Process Engineering Equipment
• Identify and state the importance and application of relevant codes and standards in Process Engineering Design
• Identify and state the application of the various Process Engineering design Software
• Understand the functions and Roles of Oil and Gas Regulators in the industry
• Understand the importance of the licenses under regulation and state the requirements of these licenses.
• Identify the activities in Upstream, Midstream and Downstream Sectors of the Oil and Gas Industry
• Understand the safety requirement of the industry

This Course is suitable to a wide range of professionals but will greatly benefit Technical and non-technical personnel in the chemical, petrochemical, oil and process industries with a need to understand and discuss fundamental process engineering areas:

• Engineers (particularly recently graduated Engineers or Engineers in conversion) looking to acquire Fundamental knowledge and best practices in Oil and Gas facilities design.
• Plant/Operations Personnel and Managers
• Petroleum/Chemical Engineers
• Production Engineers
• Trainee Process Engineers
• R&D Chemists, Plant Chemists
• Economists and Business Managers
• Project Managers/ Coordinators
• Non-technical personnel

2 Days

Minimum of an Undergraduate Degree (B.Eng. B.Sc. HND) Minimum qualification in relevant field.

Hommaston Limited
NECOM House
15 Marina (14th Floor)
Lagos, Nigeria.

This course is an interactive training delivered by our Experienced oil and Gas industry Subject matter experts and adapted to participants’ experience.

Tea Break, Certificate of Completion, and Training Manuals

REGISTRATION FORM

*  Required

*  Required

INTERNATIONAL COURSES

COURSE DETAILS
TRAINING DETAILS
ENROL
ENQUIRY

This course provides a preliminary orientation of Process Engineering, Stakeholders, Equipment, Deliverables, Project requisites, Project type and function of Oil and Gas facility Process systems. It also provides fundamental Knowledge of the oil and Gas Industry Regulators in Nigeria, Essentials of the Oil and Gas industry, and safety requirement of the industry. It will aid assimilation of project basics by a Process trainee/ new entrant, useful in supporting the design team efforts and boost employability

• Nigeria Oil and Gas industry Regulators.
• Oil and Gas industry Essentials.
• Engineering Project Management Essentials.
• Oil and Gas Health and Safety Essentials.
• Fundamentals of Process Engineering Facility Design.

Upon completion of the course, participants will be able to

• Define Process Engineering, its application and the process Engineer functionality in oil and gas projects.
• Define a Project, list the different phases and explain the differences between the Phases.
• Identify Process Engineering Design activities and deliverables
• Describe and Identify Production Facilities and Main Process Sections
• Identify and state the functions of typical Process Engineering Equipment
• Identify and state the importance and application of relevant codes and standards in Process Engineering Design
• Identify and state the application of the various Process Engineering design Software
• Understand the functions and Roles of Oil and Gas Regulators in the industry
• Understand the importance of the licenses under regulation and state the requirements of these licenses.
• Identify the activities in Upstream, Midstream and Downstream Sectors of the Oil and Gas Industry
• Understand the safety requirement of the industry

This Course is suitable to a wide range of professionals but will greatly benefit Technical and non-technical personnel in the chemical, petrochemical, oil and process industries with a need to understand and discuss fundamental process engineering areas:

• Engineers (particularly recently graduated Engineers or Engineers in conversion) looking to acquire Fundamental knowledge and best practices in Oil and Gas facilities design.
• Plant/Operations Personnel and Managers
• Petroleum/Chemical Engineers
• Production Engineers
• Trainee Process Engineers
• R&D Chemists, Plant Chemists
• Economists and Business Managers
• Project Managers/ Coordinators
• Non-technical personnel

2 Days

Minimum of an Undergraduate Degree (B.Eng. B.Sc. HND) Minimum qualification in relevant field.

Hommaston Limited
NECOM House
15 Marina (14th Floor)
Lagos, Nigeria.

This course is an interactive training delivered by our Experienced oil and Gas industry Subject matter experts and adapted to participants’ experience.

Tea Break, Certificate of Completion, and Training Manuals

REGISTRATION FORM

*  Required

*  Required

INTERNATIONAL COURSES

COURSE DETAILS
TRAINING DETAILS
ENROL
ENQUIRY

This course provides a preliminary orientation of Process Engineering, Stakeholders, Equipment, Deliverables, Project requisites, Project type and function of Oil and Gas facility Process systems. It also provides fundamental Knowledge of the oil and Gas Industry Regulators in Nigeria, Essentials of the Oil and Gas industry, and safety requirement of the industry. It will aid assimilation of project basics by a Process trainee/ new entrant, useful in supporting the design team efforts and boost employability

• Nigeria Oil and Gas industry Regulators.
• Oil and Gas industry Essentials.
• Engineering Project Management Essentials.
• Oil and Gas Health and Safety Essentials.
• Fundamentals of Process Engineering Facility Design.

Upon completion of the course, participants will be able to

• Define Process Engineering, its application and the process Engineer functionality in oil and gas projects.
• Define a Project, list the different phases and explain the differences between the Phases.
• Identify Process Engineering Design activities and deliverables
• Describe and Identify Production Facilities and Main Process Sections
• Identify and state the functions of typical Process Engineering Equipment
• Identify and state the importance and application of relevant codes and standards in Process Engineering Design
• Identify and state the application of the various Process Engineering design Software
• Understand the functions and Roles of Oil and Gas Regulators in the industry
• Understand the importance of the licenses under regulation and state the requirements of these licenses.
• Identify the activities in Upstream, Midstream and Downstream Sectors of the Oil and Gas Industry
• Understand the safety requirement of the industry

This Course is suitable to a wide range of professionals but will greatly benefit Technical and non-technical personnel in the chemical, petrochemical, oil and process industries with a need to understand and discuss fundamental process engineering areas:

• Engineers (particularly recently graduated Engineers or Engineers in conversion) looking to acquire Fundamental knowledge and best practices in Oil and Gas facilities design.
• Plant/Operations Personnel and Managers
• Petroleum/Chemical Engineers
• Production Engineers
• Trainee Process Engineers
• R&D Chemists, Plant Chemists
• Economists and Business Managers
• Project Managers/ Coordinators
• Non-technical personnel

2 Days

Minimum of an Undergraduate Degree (B.Eng. B.Sc. HND) Minimum qualification in relevant field.

Hommaston Limited
NECOM House
15 Marina (14th Floor)
Lagos, Nigeria.

This course is an interactive training delivered by our Experienced oil and Gas industry Subject matter experts and adapted to participants’ experience.

Tea Break, Certificate of Completion, and Training Manuals

REGISTRATION FORM

*  Required

*  Required

INTERNATIONAL COURSES

COURSE DETAILS
TRAINING DETAILS
ENROL
ENQUIRY

This course provides a preliminary orientation of Process Engineering, Stakeholders, Equipment, Deliverables, Project requisites, Project type and function of Oil and Gas facility Process systems. It also provides fundamental Knowledge of the oil and Gas Industry Regulators in Nigeria, Essentials of the Oil and Gas industry, and safety requirement of the industry. It will aid assimilation of project basics by a Process trainee/ new entrant, useful in supporting the design team efforts and boost employability

• Nigeria Oil and Gas industry Regulators.
• Oil and Gas industry Essentials.
• Engineering Project Management Essentials.
• Oil and Gas Health and Safety Essentials.
• Fundamentals of Process Engineering Facility Design.

Upon completion of the course, participants will be able to

• Define Process Engineering, its application and the process Engineer functionality in oil and gas projects.
• Define a Project, list the different phases and explain the differences between the Phases.
• Identify Process Engineering Design activities and deliverables
• Describe and Identify Production Facilities and Main Process Sections
• Identify and state the functions of typical Process Engineering Equipment
• Identify and state the importance and application of relevant codes and standards in Process Engineering Design
• Identify and state the application of the various Process Engineering design Software
• Understand the functions and Roles of Oil and Gas Regulators in the industry
• Understand the importance of the licenses under regulation and state the requirements of these licenses.
• Identify the activities in Upstream, Midstream and Downstream Sectors of the Oil and Gas Industry
• Understand the safety requirement of the industry

This Course is suitable to a wide range of professionals but will greatly benefit Technical and non-technical personnel in the chemical, petrochemical, oil and process industries with a need to understand and discuss fundamental process engineering areas:

• Engineers (particularly recently graduated Engineers or Engineers in conversion) looking to acquire Fundamental knowledge and best practices in Oil and Gas facilities design.
• Plant/Operations Personnel and Managers
• Petroleum/Chemical Engineers
• Production Engineers
• Trainee Process Engineers
• R&D Chemists, Plant Chemists
• Economists and Business Managers
• Project Managers/ Coordinators
• Non-technical personnel

2 Days

Minimum of an Undergraduate Degree (B.Eng. B.Sc. HND) Minimum qualification in relevant field.

Hommaston Limited
NECOM House
15 Marina (14th Floor)
Lagos, Nigeria.

This course is an interactive training delivered by our Experienced oil and Gas industry Subject matter experts and adapted to participants’ experience.

Tea Break, Certificate of Completion, and Training Manuals

REGISTRATION FORM

*  Required

*  Required

hommaston